This vacuum is hard to maintain, but each of the parts are easy to access. However, the manufacturer doesn’t specify the maintenance needs so we based our results on the closest comparable model, which is the eufy RoboVac 11S.
- Dirt compartment: The dirt compartment can be removed by pressing its button and pulling it out. It should be cleaned after each use.
- Brushroll: You can remove this part by removing the brushroll guard first. After that, you can clean it by using the cleaning tool to remove hair or debris. It should be cleaned at least once a week.
- Brushroll guard: The brushroll guard should be cleaned once a week with a dry cloth or the cleaning tool.
- Foam filter: The foam filter is located on the top of the dirt compartment. It should be washed once a week.
- HEPA filter: This filter is located on top of the foam filter. This filter should be cleaned with another vacuum cleaner or by using the cleaning brush. You can also tap it clean.
- Side brush: The two side brushes can be pulled out of place. They should be cleaned once a month, using a damp cloth with warm water.
- Front wheel: You can pull out the wheel and wash it with water once a month.
- Sensors: The sensors on the vacuum should be cleaned with a cloth or cleaning brush once a month.
- Charging pins: The charging pins should also be cleaned with a cloth or cleaning brush once a month.
You can clean any part with the brush on the dedicated cleaning tool. If you wash any part with water, they must be air-dried before using them again.